Doing maintenance on your earth-moving machinery is important so major problems are prevented. In a mining site, the last thing you’d want is an equipment that malfunctions. Improper maintenance or not doing a maintenance at all can shorten the lifespan of the machinery. This will lead to costly repair and frequent breakdowns that slows down your operations. You can prevent all these including injuries by following the tips below.  

Keep the Machinery Lubricated 

The moving parts of any machine is going to fail if they are not lubricated properly. If there is no lubrication, the engine parts will work harder that will create excess friction. This friction will then lead to sever wear and tear on the machine. Do you know the meaning of this? The lifespan of these parts will shorten. You can avoid this machinery destruction by lubricating the moving parts in a specific interval.  

 

Clean the Machinery Well 

Aside from the proper lubrication, the earth-moving machinery also needs to stay clean a possible. Since the mining site is dirty, the machine will get all the dirt and debris. Once the dirt gets accumulated in the machine, it will lead to costly repairs. The parts of such machine is fitted with special filters and seals that will keep the grime out of the sensitive areas, they serve as a protection.  

It needs cleaning so they won’t be blogged up by excessive dirt. The should be kept clean, the broken seals should be repaired and the filters should get regular inspection. You can also keep the machinery clean by housing it in a building, like a garage or shed.  

 

Regular Maintenance 

Doing regular inspection and repair is not enough to keep the machinery in a good condition. There should be a schedule of the regular maintenance. The schedule should include notations on how often you should inspect each parts. This notation should include the schedule for inspection, repair and general maintenance. Your maintenance should be consistent.  

The seals and gaskets should be inspected regularly. The pulleys and belts should be check for proper alignment. If there are broken parts they should be replaced immediately. The moving parts should be lubricated.  

 

Pay Attention to Wear and Tear 

During your operations, you might see signs of wear and tear. These signs should be taken care of immediately. If you don’t, it might result to malfunctions that will need a diesel mechanic brisbane. Some of these signs are belt shape, heat and vibration. The vibration is caused by gear glitches and misaligned belts. High temperature than normal is caused by overuse or improper lubrication. Misaligned belts are caused by many issues that need to be repaired right away.  

 

Train the Employees 

If you are keeping the machine in its good shape but those who operate it are not skilled, it’s still useless. The employees, especially the new ones, should be trained thoroughly. The training will help the employees operate the machinery in a safe manner. This way, everyone is safe and the machinery is kept in its top shape.